h a l f b a k e r yStrap *this* to the back of your cat.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Most laptop keyboards are designed so that the keys are in the "full up" position when the case is closed. This means that every milimeter of travel requires adding a milimeter of thickness to the case.
I would propose keys using something like the "buckling spring" design, but where the springs
are all tied to a slider which is operated by opening or closing the case. When the case is open, all the springs would be compressed in such a way as to push up on the keys. Closing the case, however, would release the springs allowing the keys to all fall down. An electrical interlock would prevent the "depression" of the keys in this case from causing any keystrokes.
Using this sort of approach, it should be possible to get a decent tactile key response from a keyboard which, when in "flat" mode, was not significantly thicker than current units.
compaq armada
http://www.morochov...atch/cw/ff60620.htm
baked in the fourth paragraph. [neilp, Oct 04 2004]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Annotation:
|
| |
With conventional notebook keyboards, most of them are only 2-3mm thick anyway. I can see your attempt to get a lower-profile laptop, but I would think tha the mechanism would take-up greater space than the keyboard that is in there already. |
|
| |
does the screen hold them down then? isn't it bad to apply pressure the the screen? |
|
| |
No, the keys are retracted to a lower position via a slide that buckels the springs, thus lowering them when the screen is closed. |
|
| |
quite right... sorry. I swear I did actually read that second paragraph before I questioned... maybe it's time for a nap |
|
| |
Each spring would be an arched piece of metal; the keys would apply pressure at the center of the arch. Pressing a key would cause the arch to flex until it buckled, whereupon the resistance level would drop appreciably. To allow the pressure on the keyboard to be released at the appropriate times, one end of each arch would rest against a sliding piece which would be operated by the laptop cover (alternatively, the two ends of each arch could be on counter-moving sliding pieces, but that would probably add complexity for little benefit). |
|
| |
I like it, but why the interlock? <closes computer> |
|
| |
`1234567890-=
qwertyuiop[]\
asdfghjkl;’
zxcvbn,m./ |
|
| |
Is the thickness of a laptop greatly influenced by the thickness of the keyboard bit? I always imagined it was the screen and all the gubbins inside that took up the room? |
|
| |
Once upon a time there was a Compaq that lowered the keys on the keyboard when you closed the lid. Unfortunately I don't remember the model. I had one maybe 5 years ago, but it wasn't new then. I'm not entirely sure if it actually compressed the keys, it might have just raised the whole keyboard when you lifted the lid so the keys could stick up above the surface when open. |
|
| |
Regarding the comments about the thickness of current laptop keyboards, sure some may be only 3mm (I measure my laptop keyboard to be more like 5mm), but with this technology, you could have a keyboard that is very flat (maybe less than 2mm) when closed, yet has keys that move like a normal keyboard (I measure my desktop keys moving 4mm) along with the buckling spring feel which some people seem to like so much. |
|
| |
My guess is that the selling point wouldn't be that it's thin. If you want thin you can always go for a membrane keyboard. The selling point would be that it feels like a real keyboard, but is thin enough for a laptop. |
|
| |
what [scad] and [letsbuildafort] said, the compaq laptops def. used to retract when you closed the lid, so that they are all depressed when the lid's shut. soo. it's baked. |
|
| |
I wonder how Compaq does theirs physically? Although I didn't mention my conceived physical implementation until an anno, I did have it in mind when I wrote the original idea. I wonder if Compaq does something similar or different? |
|
| |
I like it, but why all the spring mechanisms? Why not just a recessed button that a projection on the monitor hits, which would pull down the keyboard? or it could be built into the hinge. |
|
| |
My keyboard is slightly recessed. |
|
| |
I'd *kill* for a laptop (or highly-portable lunchbox-type) system with buckling spring keyboard and Trackpoint. Laptop keyboards are the reason I could simply NEVER use a laptop, "as is", as my real computer. On a Lexmark-type buckling spring keyboard, I can easily type 110-120+WPM. On a typical laptop, I can barely manage half that rate. |
|
| |
If someone made a laptop with buckling spring keyboard, it would weigh about a pound more, and be an inch or so thicker (most of a Lexmark keyboard's weight comes from the steel plate at the bottom added for that exact reason). |
|
| |
I wish to god I had the tools and equipment to make my own molds and plastic cases. I'd buy a high-end laptop, then take the guts of a stick-equipped Lexmark keyboard and fashion the parts to mount it to the laptop's chassis, then make a new top shell , replace the LCD ribbon with a longer one (since it's probably *exactly* the right length for its original configuration and wouldn't reach if the lcd panel were moved a half inch or so further away from the motherboard in the base. |
|
| |
Alternatively, I'd buy an ultrathin laptop, and fashion an external buckling spring keyboard that could just sit directly over the laptop's bottom half. |
|
| |
Sigh. I need a new computer, and should probably buy a laptop, but as if the current awful crop of laptop keyboards weren't bad enough, NOBODY (repeat: NOBODY) makes a Turion or Athlon-64 based laptop with pointer stick. And the only touchpads I can halfway tolerate are the ones on Averatec notebooks (I have no idea what makes them different, but they *are*), which are nowhere close to middle of the line, let alone high end. |
|
| |
Keeping very thin metal springs compressed most of the
time would cause them to wear out, likely in a manner of
months. Steel implements only hold their temper
indefinitely if not under strain when stored. |
|
| |
Oh I don't care, I'e just been plagued by tpos since I startedu sing a laptop keyobard: some the direct fault of the keyboard, some th efault of having to jog my own elbow while typing. |
|
| |
I don't think a greater key travel is a bonus - it's
just a question of what you're used to. |
|
| |
Each time I've changed computers, the keyboard
has been shallower and with less travel. Each
time, I have cursed the new keyboard for a few
hours. |
|
| |
Yet, if I go back to an older laptop or a desktop
machine, I absolutely hate the big clunky keys
that have to be pressed sooooo far. |
|
| |
Have any of the previous annotators subsequently
come to love their low-profile keyboards? |
|
| |
Part of the problem is ergonomics, lack thereof: unless the laptop is at the same distance/angle all the time, the fingers don't get the same feel. Arguably even a Model M would suffer under the same circumstances. But not much. |
|
| |
I'd o for thte thick laptop with a bs keyboard. It'd be thicker, marginally heavier, and I wouldn't have any goddam typose to continually correct. |
|
| |
Arguably a 'portable' rather than a 'laptop'. |
|
| |
As long as I've got something thick enough for a clicky, may as well have something thick enough for a snooker-ball trackball. |
|
| |
It probably wouldn't be "clicky" enough for good typing but
replace the springy steel with compressed air which is very
springy. Hard plastic-topped keys with collapsible soft
sides fold down to nothing but pop up again when re-
inflated by a pump mechanism like on those air-fitted
running shoes. |
|
| |
It's not the low profile of laptop keyboards that gets me,
it's the arrangement. I realize there's limited space, but
that doesn't mean you can't at least take a stab at an
ergonomic layout. Of course, I'm a tall guy with big hands,
so others may not share this gripe. |
|
| |