h a l f b a k e r yWhy did I think of that?
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Relentless overhead blows with a 1.360 kg block splitter turn a big lump of wood into middlings and kindlings, either quickly and crisply or horribly slowly, depending mostly on whether the grain is lined up nicely.
But that always assumes you can make the thing stand up to be hit.
The target lump
of wood approximates to a cuboid, a cylinder or a semi-cylinder, and the long faces are long in the direction that was vertical when the wood was part of a tree. Therefore, to be in with a chance of catching the grain, you have to stand it on one of its small faces, which would be fine if its vertical cross-sections were rectangles.
They are trapezia.
Therefore the target lumps lean and often topple.
If you're following this closely, mind your head.
The solution is a type of chopping block. Its rough (i.e., high-friction) wooden upper surface has three planes. Each of these planes is wide enough to carry the short face of a target lump.
They sit at 0, 15 and 30 degrees from the horizontal. This is because 7.5 degrees of lean are rarely enough to carry the centre of gravity to the unsupported side of the fulcrum. Unless the original mechanical saw, that made the lump, was swung by a gremlin with malice aforethought, the basic lean will not exceed 37.5 degrees.
To this point, the idea is far too simple. Therefore let it be turned around a vertical spindle and then locked in place with locking pins. The locking action must pari passu retract the bearings on which the block rotates around the spindle, to protect them from damage from the shock of those relentless overhead blows.
William Ewart Gladstone
http://3.bp.blogspo.../s1600/IMG_0010.JPG The point is that he was a pillar of stiff Victorian morality also well known for chopping wood. It's a sort of pun, you know. I'm told they can be very effective. [pertinax, Jul 20 2015, last modified Jul 21 2015]
William Ewart Gladstone - family tree
http://www.wikitree...tone-Family-Tree-68 their typist has a terrible stutter (poor thing) "g-g-grandfather?" [not_morrison_rm, Jul 20 2015]
In the meantime...
https://www.youtube...watch?v=H2d2GTBga6I [zen_tom, Jul 21 2015]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
|
I see an old feller. Held by a lumberjack. |
|
|
I thought this was going to be an idea about your arse
stiffening up. |
|
|
Or, you could stack your wood inside an old car-tyre and
chop it up like that [see link] |
|
|
I gather that you and I both spent the past Saturday splitting
wood in the Perthian hinterland [pertinax]? As I was doing
my lumberjack impression I was thinking about producing
chopping blocks from tough, recycled plastic with the top
presenting varying faces with differing angles. You can
always find one bit or another to compensate for the angle
of the block of wood next to be split. Yours is more 'natural'
but mine might be longer lasting. |
|
|
A more zen solution would be to use the wood to
break itself. |
|
|
This could be accomplished with a suitably zenny
gas-gun, some wadding and a stout metal edge.
Simply fire the offending wood at the metal edge
(using the wadding to achieve a good seal in the
barrel), and its momentum will cause it to be
cleaved in twain. |
|
|
You know it's hard to get a good visual of you and
[AusCan531], chopping wood in your bikinis, on the beach
with the temp nudging 100 degrees. Sweat, lots of sweat is
all I see. So + for the hard earned idea. Lots of sweat equity. |
|
|
^Photos will be sent to your inbox for a small fee. Photos
will not be sent to your inbox for a large fee. |
|
| |