h a l f b a k e r yOh yeah? Well, eureka too.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
This spring powered weapon resembles a typical firearm, except it fires highly compressed springs. The spring ammunition is best described as greatly scaled down truck air brake springs. These are about the size of a 12 guage shotgun shell. Because the springs have only limited shelf life they are
purchased uncompressed, and the user requires a lever operated press to 'charge' them before firing, or in this case, springing.
The casings also include a small amount of lubricant that is released upon springing. Once sprung, the lubricant coats thhe rifled barrel of the Spring Gun, and the spring rotates, lubricated as if a screw inside the rifled grooves, stabilizing the round in flight. The Spring Gun can also be fire powered, featuring a gas torch flame heating the loaded breech to a high temperature, as this will allow for a more energetic decompression.
" regarding the barrel pressurization the lubricant can vaporize rapidly like popcorn oil, if the breech is torch fired "
Maizechinegun
[normzone, Feb 12 2016]
[link]
|
| |
How much energy can you deliver this way? Let's
assume that one ton (1000kgf or 10,000N) is the
greatest force you can deliver to compress the
spring, by means of the lever. Assume also that
the
spring is 20cm (0.2m) long, which is generous. |
|
| |
The energy stored in the compressed spring will
be
1/2 x 0.2 x 10000=1000Joules. This is more than
many pistols, and less than most rifles. So, not a
completely silly idea. |
|
| |
On the other hand, it's going to need either one
very very long lever, or a short lever that you
pump a lot of times. |
|
| |
It's not going to work, and here's why: the reason the
bullet leaves the muzzle of a rifle going so lickety-damn-
split is because it is propelled all the way there by a
rapidly expanding cloud of combustion gasses. The
propellant literally imparts constant force on the bullet
from the moment of ignition all the way to the end of the
barrel. The bullet does no work. A spring, on the other
hand, does not enjoy this free ride. Not only must it
produce sufficient energy to move itself, but once that
initial surge of force is delivered, that's it. Friction with
the lands will eat that up mighty quick, and there'll be no
expanding gasses coming along to provide a boost. |
|
| |
A crossbow, after hundreds of years of refinement, possibly represents the pinnacle of spring powered weapon capabilities. The low muzzle velocity (the biggest problem with the idea) in a crossbow is compensated by the shape and weight of the projectile. |
|
| |
"Its not going to work" well for one thing the spring wouldint spin
inside the grooves, that's were it screws up. But regarding the
barrel pressurization the lubricant can vaporize rapidly like
popcorn oil, if the breech is torch fired. |
|
| |
If the spring were smaller in diameter than the bore of the barrel then rifling would still be applicable. If the spring extended past the end of the barrel then it should be able to be made to mimic the compression of expanding gasses. |
|
| |
Recoiling the spring for a second shot will be problematic. |
|
| |
//It's not going to work, and here's why:// It's not
going to work _well_, but it will work, and here's
why. |
|
| |
Given the (admittedly cumbersomly large) stiff
spring, the total energy released is roughly similar
to that of a pistol (same otm, at least). |
|
| |
For the pistol, energy is wasted in recoil, in
frictional losses between the bullet and the
barrel, in the expansion of gases beyond the
muzzle, and in heat. The rest winds up as k.e. in
the bullet. |
|
| |
For the spring gun, energy is wasted in recoil, in
frictional losses between the spring and the
barrel, and that's about it. |
|
| |
To a crude approximation, most of the energy
winds up in the projectile in either case, if the
gun and projectile are reasonably designed. |
|
| |
Where the spring gun loses out, though, is in the
aerodynamics of the spring, and in the mass of the
spring (greater mass equates to smaller velocity
for a give k.e., so the spring won't travel as far or
fly as straight). |
|
| |
You could get around these limitations by just
using the spring to kick a regular bullet out the
end of the muzzle - i.e. use the spring to replace
the charge rather than the bullet. This would still
be cumbersome, but with sensible design would
give you a weapon that fired a pistol-style bullet
at pistol-like speeds. |
|
| |
To design a spring round for a conventional shotgun would be quite
simple. First acqure a spring of right length, diameter and
stiffness. Then compress in a press, after placing two notched caps
on
both ends of the spring. Then insert a lock pin that once turned
cannot pass through the endcap notches. One end of the pin would
have to be beveled so when the firing pin strikes it turns the pin to
release the spring. |
|
| |
// You could get around these limitations by just using
the spring to kick a regular bullet out the end of the
muzzle - i.e. use the spring to replace the charge rather
than the bullet // |
|
| |
This has been tried in several modern weapons, most
notably the PIAT, a WWII British anti-tank weapon known
for its difficulty in loading and cocking, short range and
abysmal accuracy, frequency of misfire, and the general
hazard imposed on its operator and those standing nearby. |
|
| |
Yeah, but this posting is the first BS gun. |
|
| |
Not to mention my popcorn-powered steam rifle that used cubes of butter for projectiles. |
|
| |
Only because I have thusfar restrained myself from posting
firearm-related ideas... |
|
| |
Challenge accepted. Do you want a practical idea or a
humorous one? |
|
| |
Hardly, but I'm only going to do one gun idea, and I like to
play to my audience. |
|
| |
I thought we were in the Halfbakery. |
|
| |
My ignorance of modern country music thwarts your
earworm attack. Point: [The Alterother]. |
|
| |
Since it requires a special mechanism anyways, why not simply make it a smooth-bore ? Aerodynamically you can probably get some spinning out of a spring-shaped projectile. |
|
| |
Unlike a regular bullet, the spinning will count towards impact force as it corkscrews its way into the target. |
|
| |
The spring doesn't have to be the main projectile, the locking pin
in my previous anno can be the bullet. |
|
| |
Regarding halfbaked weapons, weapons are one of the most
halfbaked things because it's something that should stay at the
conceptual stage. |
|
| |
Now that's country music! |
|
| |
If you make the spring big enough...the gun itself
could become the projectile. |
|
| |
<quietly enters room and whispers to 21Q> Psst - Alabama did that Texas song, not Brooks and Dunn. <sneaks back out the way he came in> |
|
| |
I wasn't aware listening to country music automatically makes one a redneck. Besides, I'm Canadian. How could I possibly have a red neck when we have eleven months of snow and one month of bad hockey ice? |
|
| |
Oh, I understand now - chafing from the scarf, eh!? : P |
|
| |
Maybe you should get an iPad. |
|
| |
This time next year, that'll be on reality tv. |
|
| |
Instead of torch firing the breech the spring can be a resistor load
for electric current. |
|
| |
Patience, grasshopper. I have a lot on my plate right now,
but I'll get to it. |
|
| |
Don't compress the spring. Extend it. Have a coil spring attached at the muzzle, with an ID of say 20mm. On cocking the weapon, the free end of the spring is pulled back to the breech, whereupon it is secured by the sear, and a projectile is clipped onto the spring end. Pull the trigger and the spring retracts and launches the projectile. This puts the barrel into compresison, so it'll have to have sufficient diameter and stiffness to support the load, but beyond that I think this would work better. |
|
| |
I like Custardguts modification. The spring should actually be longer than the barrel of the gun by about 50%. After firing this excess spring will droop out the front, bobbing around. A small sign declaring "BANG" attached to the end of the spring would not decrease the workability of this idea. |
|
| |