h a l f b a k e r yA dish best served not.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
(See attached image).
This is a partially self-regulating, but electrically-controllable epicyclic (planetary) transmission. I originally envisioned it for in a car or truck with an internal combustion engine (piston or turbine) as the main drive, but it would probably work with a hybrid or electric
main drive as well, or in a wind turbine, or as a mechanical 'soft-start' device.
The concept is this: initially, the ring gear is stationary, providing a low gear ratio from input (sun gear shaft) to output (spider shaft). But the ring gear is not fixed; friction begins to rotate it as well (against its own inertia), effectively increasing the gear ratio up to 1:1.
But wait, there's more! Around the ring gear is a motor/generator, enabling either regenerative braking, to slow down (or allow slower speed-up of) the ring gear; or to act as a motor, to provide even higher gearing as an 'overdrive'. It would probably need a caliper brake or something to provide a 'locked' position for the ring gear.
As the 'normal' maximum ratio is 1:1, a pre- or post- gearbox is probably required, depending on the main drive speed and final use.
Much calculation and experimentation would be required in regards to actual gear ratios, masses, etc - that's the halfbaked bit.
The ShadowBuilt RingSpinner - for a smooth transmission.
(?) Ring Spinner Diagram
http://s1199.photob...ent=RingSpinner.jpg
Colour-coded for your enjoyment! [neutrinos_shadow, Dec 15 2011]
How the Prius transmission works
http://www.howstuff...com/hybrid-car7.htm
[scad mientist, Dec 16 2011]
bike hub with two motors
shameless self promotion [xaviergisz, Dec 16 2011]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
| |
1) If the ring gear is not fixed, and there is a load on the spider, won't the ring rotate backwards, allowing the assembly to idle? |
|
| |
2) Using a planetary transmission to combine inputs and outputs (such as engine - motor/generator - drive shaft) like this is well baked. |
|
| |
Congratulations, you just invented the transmision in the Toyota Prius. Well, you left out a few bits and connected the inputs, output and motor/generator to different points of the planetary gear, but I'm confident that if you did enough calculation and experimentation you'd end up with about the same solution. See link for a nice description of how the Prius works. |
|
| |
I knew that, but felt it was like mentioning the Space Shuttle to demonstrate that aerodynamic lift has been invented. |
|
| |
I must confess, I didn't do much digging before posting this.
The electric motor around the ring was an after-thoought, more for energy efficiency (power back to a battery, rather than lost as heat) than as a drive.
The caliper brake could be applied at start-up if required.
I would say that 'bits missing' and the arrangement of input and output were rather important in a design. Simplicity was the driving force here. |
|
| |
It's the old problem that, because millions of person-years* have been devoted to mechanical musing and tinkering, you are very unlikely to come up with a new and improved permutation of cogs and engines and what not. |
|
| |
If you could think of a way to use planetary gears to match the speeds of a flywheel and powered wheels, I'd be interested; but see above. |
|
| |
*Figure made up on the spot. |
|
| |