h a l f b a k e r yWe have a low common denominator: 2
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
Y'know those burner knobs that are calibrated in units natural to food preparation, like "simmer," "boil," etc.? What if they really worked? A little feedback could vary the heat to maintain a proper temperature for the cooking task at hand. For example, there's no point keeping the heat at maximum once
the water's actually boiling, but every reason to give it maximum heat until then. The sensors here are the tricky part: might have to embed in the actual cookware to get a good reading of food temperature (as opposed to pot temperature). On the other hand, a downward-looking infrared camera could monitor the temperature of the entire rangetop down to chilibean resolution. (A variation on the "thermochromic ovenware" (q.v.) might be to project the temperature image back onto the range using an LCD projector, such that hot areas or pots are illuminated red, while cooler areas get shades down to blue.) A little more smarts may make an automatic cooker, for example, "pork chops need to be at this temperature for this cumulative time; don't exceed a maximum of XXX degrees and turn off the heat when done."
Predictive Temperature Probe
http://www.halfbake...Temperature_20Probe
[Steve DeGroof]'s idea compliments this one. [phoenix, Jul 24 2000, last modified Oct 05 2004]
[link]
|
| |
I wonder whether you'd be able to build a temperature sensor into the heating elements themselves - this would have the advantage of being compact and not needing special cookware or a downward-pointing camera above the range. What the sensor would have to do would be to measure the temperature of the radiation from the bottom of the saucepan. If a saucepan is filled with cold water, despite lots of heat energy going into the bottom of it, it may not get very hot and thus may not reradiate much heat energy donwards, but as the water is heated and thus cools the saucepan less it will radiate more heat energy. Then the sesor would be hooked up to a negative feedback circuit designed to keep the heat radiation from the bottom of the saucepan constant. |
|
| |
Try a timer/Voltage regulator inline with the heating element. Have to find one that can take 220V, and you have to remember how long it takes water to boil at your altitude, but you could probobly find the parts at Radio Shack. I use Propane, which might be a little more complicated. |
|
| |
A timer is a lame, open-circuit
solution. The "time it takes
water to boil" depends not only on
your altitude, but on how much
water you put on to boil! The
whole point of this idea is to use
*feedback* to automatically set
the burner temperature to suit the
food being cooked. |
|
| |
I was thinking in terms of controlling the element: once that is acomplished, you can rig it to a meat thermometer or something - knock yourself out. |
|
| |
My parent's old gas stove had a burner with a thermostat in it. You'd simply dial the temperature you wanted and the burner would switch between high-flame and low-flame to maintain it. The stove used a gas pilot light, so if the burner went out accidentally it would relight rather than blowing up the house. Unfortunately, since my parents got rid of that stove I've never seen a burner like that again. |
|
| |
An IR device mounted on the exhaust hood that looks down at the pans and "sees" their temp. |
|
| |