h a l f b a k e r yResident parking only.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
As a software developer, I often have to develop code which communicates via serial port. In many cases one side of the protocol will be a PC and the other side an embedded device; during development of the PC side, however, it's often useful to write or used a PC-based "simulator" of the embedded device.
Unfortunately, having the simulator and main program talk to each other often requires either running them on different machines or running a null modem cable from COM1: to COM2: and having the two programs communicate through that.
What I would like to see would be a virtual device driver which would create two COM: ports (e.g. COM7 and COM8). Any time only one port was open it would act as a black hole (data going in is tossed, and no data comes out), but when both ports were open any data sent out one port would appear at the other.
Such a driver should be fairly simple, but would increase the usefulness of many PC-based simulators immensely.
[nb: while Linux might be able to do this without drivers, many aps and simulators run under Dos or Windows].
Google search... (129,000 hits)
http://www.google.c...&btnG=Google+Search
for +virtual +serial +port +Windows [phoenix, Feb 27 2002, last modified Oct 05 2004]
The very first result returned from the above search
http://www.lvr.com/serport.htm
"Virtual Serial Ports Driver creates two software-only serial ports that are virtually connected to each other. All data sent by other application to one of the ports will arrive at the other port. For use as a debugging tool or a way to create a data channel between two Windows applications. For Windows 9x/Me. From Vitaliy Golubenko." [phoenix, Feb 27 2002, last modified Oct 05 2004]
Hawk's link
http://www.alarit.c...oducts&subpg=p_afsd
Grrrr.. [yamahito, Aug 13 2002, last modified Oct 05 2004]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
| |
// Where does all of the missing data go?// |
|
| |
Try sending data out a serial port with nothing connected (handshaking turned off) and follow it. You'll probably find it goes to the same place as the data would in a cross-port driver. |
|
| |
[obligatory "this is baked in unix, and called a pty or
pseudo-terminal" post] |
|
| |
wiml: Do pty's support modem-control lines and realistic flow constrictions? Although I didn't explicitly mention it, one feature I would like in a cross-looped port driver would be the ability to set "baud rate" and "modem-control wires" and have the port mimic real-time interactions between both ends. |
|
| |
Using two machines isn't impossible, but it can often be a nuisance. Using one machine is often much more convenient. |
|
| |
I see phoenix found something. I was wondering about the Microsoft Driver Development Kit, which has lots of support for debugging serial port applications, as well as other types of driver. But after wading through page after page of Microsoft's horrible websites, I gave up looking. |
|
| |
Isn't it amazing how a company like Microsoft can't maintain a decent web site? What's even more amazing is that contradictory information can often be found at various locations. |
|
| |
phoenix: Thanks for the link. I was at a loss for how to be specific enough in a request to get something useful out of Google (since finding something good out of 10K+ matches is usually nearly impossible). Your query, though it produced over 100K matches, happened to have what I was looking for in the first link. Go figure. |
|
| |
supercat: yes, the point of a pty is to imitate an attached
terminal, so it appears to be a serial port, with modem
control lines, baud rate, etc. etc. (It doesn't actually limit
the rate of transmission to the baud rate, but it supplies
enough stuff that the 'master' can do that itself, if it
wants to.) If you didn't need all the imitation modem
control lines and so forth, you would just use a pipe or a
socketpair. |
|
| |
Just found another very good virtual serial driver solution - demo is only 30 kb and has full functionality to test. Looks like I've found what I was looking for.
I can share it with you - http://www.alarit.com/index.php?pg=products&subpg=p_afsd |
|
| |
Hawk, there's a link button at the top. |
|
| |