h a l f b a k e r yVeni, vidi, teenie weenie yellow polka dot bikini.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
Given a leak with no valve upstream, what do you do without shutting off supply or draining any downstream vessel (like hot water cylinder)
What if there was a magnetic sand in the flow, that when a strong magnetic field is place through the pipe, that congeals to block the water in two places and
allows access to a section. Any fix up needed, there after, is a breeze.The sand, of course, would be inert and washes out quickly.
There's only one severe problem.
[link]
|
| |
If a pipe has a leak, then what if you surrounded the leak
with your magnetic sand/dust, and put the super-strong
electromagnet on the
other side of the pipe? Then the dust might enter the pipe
through the leak/hole, and from there accumulate inside
the pipe to block the water flow, enough that the leak
could be repaired. |
|
| |
Could instead be an interesting way to unstop a clogged
drain. Throw some iron-filing stuff down the drain (with the
blessing of your local water and sewer utility) and with a
rare-earth magnet on the outside direct it to the clog and
scrub. |
|
| |
Or you could always just use a snake. |
|
| |
The usual method is liquid nitrogen and a thermal blanket. There are many pipe freezing kits available specifically for plumbers in this situation. |
|
| |
They freeze the pipe solid? I thought that burst pipes. |
|
| |
Well you're only freezing a few inches of pipe, so there's not much expansion really. |
|
| |
A hot pipe wouldn't freeze for very long but a nice solution. |
|
| |
[Vernon] I was thinking more along the lines of installing a valve for future proofing. The leak was in a regulator fitting. |
|
| |
//The usual method is liquid nitrogen and a thermal blanket.// |
|
| |
You can also do it with dry ice, packed into a towel around the pipe. Lasts longer than freeze-sprays. However, if the leak is substantial, the flow of water will prevent freezage. |
|
| |
Frog spawn will seal a hole in a pipe as long as the water is
cold, and you can wait around for long enough for a
tadpole to form and block the hole. A longer wait for a frog
to develop is required for a larger hole. This method won't
work with boiling water. |
|
| |