Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
Eureka! Keeping naked people off the streets since 1999.

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


                                       

Please log in.
Before you can vote, you need to register. Please log in or create an account.

maglev cable transport

cable cars suspended and propelled by maglev technology
 
(+1, -1)
  [vote for,
against]

(spin off from 'tree travel') If the Japanese can suspend a locomotive and send it hurtling some 360 mph, how much trouble would it take to electromagnetically suspend and propel a 500 lb (car and passenger) riding on a cable?

Couldn't the maglev effects be increased with an extra long tube tractor of magnets and wiring (or however the damned thing works) that rides over the cable? It would seem to require less power to control and suspend than riding on a rail.

And all much much cheaper? Cheaper than a road. Like flying but requiring less energy and risk.

M Carter, Jan 06 2008

Pop Mech MAGLEV article http://www.popularm...tation/4232548.html
[MisterQED, Jan 07 2008]

tree travel Cable http://www.gbgindus.../StrandedCable.htm.
cable strengths and weight [M Carter, Jan 08 2008]

tree travel cable http://www.gbgindus...m/StrandedCable.htm
corrected above link had a period at end... [pashute, Mar 17 2008]

[link]






       // (or however the damned thing works)// I think this indicates an area where you might want to do some reading.   

       If I understand, you want to set up a sort of cable-car system, with the cars suspended from the cable by some sort of frictionless maglev system which also propels them?   

       Well, OK, but the "cable" is going to have to be a massive rigid structure, and the car itself is also going to be pretty hefty. The sensible thing would be to have the "cable" build directly on the ground (to avoid massive support pillars every hundred metres). And the "car" would be more efficient if it were much larger, and capable of carrying a few hundred passengers. Perhaps it could called something like "Transportation Induction" or "Train" for short.
MaxwellBuchanan, Jan 07 2008
  

       I'm a positive guy and I can usually look at an interesting idea and think of some way to make it work, but come on.   

       MAGLEV can be a good way to limit friction is certain types of high speed motion, but has no place here. MAGLEV needs something to magnetically attract to or repulse from. Cables are strong in tension, but nearly useless magnetically.
MisterQED, Jan 07 2008
  

       A massive merci Maxwell et Mister. I obviously have only read enough about maglev to use the name, some Times articles decades ago. But with all the tech miracles flying around it didn't seem too great a leap to miniaturize the maglev effect to deal with only a fraction of the load of the existing trains.   

       Maybe this idea will have to wait for the technology to arrive. But there may be value in naive dreamers proposing half baked ideas that might not otherwise fall through the cracks of a learned technician's ceiling. The new comes from somewhere, usually hidden under piles of discarded notions.   

       What spawned this one was a gut feeling about electromagnetic force, the amount of force felt when holding close two small neodyni...magnets at similar poles or how much it takes to pull them apart - and all this force created by a few grams of magnet.   

       It seems they could be repeated along a wire for 20' to do some lifting. With the same level of power found in electromagnets there must be a way to transform a low volt current in a wire into a low weight maglev device. I guess the cable would have to be a magnet itself with the same pole as the inside of the tractor tube that floats frictionless around the cable.   

       How about: brushes on the tractor take the low current in the cable and power its long radial electromagnet system (basically just a coil, no?) surrounding the cable. And also reintroduce some wierd current back into the cable that transforms it into an electromagnet but only for the length of cable being passed by the tractor, something going on between the front and back re-contact brushes. An alternating current creating alternating polarity in synch between the cable and the tractor? How to turn a length of cable into a temporary electromagnetic?   

       What about rail gun technology? Is that the same as the maglev train? It reaches top power gradually, maybe my dream cable maglev suspension could build up slowly , accumulating magnetic power gradually while passing over a charged cable.   

       Otherwise, it's back to the pulley wheels for suspending the low weight gondolas in 'tree travel.'   

       5 am up in the mountains. Time for coffee.
M Carter, Jan 07 2008
  

       Aside from the problem of making maglev work with a cable instead of a rail, there's also the question of "why?".   

       Even if you completely eliminate wheel- related friction (the only advantage of this proposal over a "conventional" cablecar), you are only going to save a small amount of energy (probably less than you lose in all the maglev circuitry). In a small vehicle such as you propose, the major losses will come from wind resistance (and the need to climb a gradient). Much more efficient to go for one huge vehicle than many tiny ones.   

       I guess I'm just not seeing this. Sorry.
MaxwellBuchanan, Jan 07 2008
  

       As dreamed up in 'tree travel' the goal is a cheap, easily deployed cable system that doesn't require a large infrastructure, but can be hung on tree trunks. Only a low weight system could do that, and that is part of the charm, to float through natural scenes in solitude or two.   

       Ski lifts pull the car attached to the cable rolling on pulleys, requiring supporting pulleys at each anchor station, but if the gondola rode across a single cable with its own electric motors, powered by a safe low current in the cable, there would be less shmuck to hang in the forest branches, much easier to deploy. A cheap alternative to driveways into isolated rural homes, less harm to nature.   

       Doesn't have to go fast to be fun and functional, the gradient would have to be mild or the pulley wheels would slip, enter the desire for a maglev traction that might climb steeper grades, ride the cable more securely, no moving parts.
M Carter, Jan 07 2008
  

       Ah, OK. Well, to be honest I don't think you're going to come up with a maglev system that can be tree-supported or cheap enough to operate at low capacity. Why on earth use maglev, especially for small cabs at low speeds? If you have to get power to things, then just have a motor in the cab pulling it along a regular (current-carrying) cable. Your proposal is a bit like suggesting establishing a railway line for sight- seeing or private access.   

       Also, there is no way you can hang a 500lb car from a cable slung between trees. Have you stopped to calculate the lateral force on the trees? It will be several tons, not 500lb.
MaxwellBuchanan, Jan 07 2008
  

       Your skepticism is appreciated. OK, for now, we'll skip the maglev idea and go back to multiple rubber pulley wheels on cable as described in 'tree travel' . You're right that, since we're going slow, the wheels would suffice. Maybe maglev is still too much like Diet Smith's Magnet Ship, "well, if the earth's a magnet, why can't we ride on it's waves?"   

       It seems to me that a typical pine of 16" dia. trunk at 20' height would not suffer from 500 lbs hung 1 meter out from it. If so, the hanger itself could be suspended from two close trees. Also, the connection to the tree will be spread up and down the trunk several feet with a large enough bracket. I'd say three guys could sit on a thick limb, 1 meter out from the trunk, without laterally over-stressing the tree trunk. Imagine the stress on it from a gust of wind.   

       But the idea is not at all like establishing a railway line.   

       I Googled this site for an idea of cable weight, They list 1/4" cable with breaking strength at 7000 lbs, weighing 110 lbs per 1000ft (much less than imagined,now I'm skeptical)- Spans would be 100' - 300', though 1000 ft would probably work fine too. Aluminum cable also available.   

       International Space Station just passed at 7:20, right on schedule. 'Rosy fingered Dawn' appearing in the east...
M Carter, Jan 08 2008
  

       //would not suffer from 500 lbs hung 1 meter out from it//   

       That misses the point - I should have explained more clearly. If you just want to fix your 500lb load to the side of the tree, then the tree only has to take a 500lb load. That's fine if the tree is sturdy.   

       But that's not what you're doing.   

       You're running a cable between two trees, and then asking to support a 500lb load from the cable. The physics of this means that the sideways pull on the trees is way, way more than 500lb - it's just geometry.   

       For example, suppose the trees are 20m apart. Suppose that your 500lb car is mid-way between them. Suppose also that we allow the cable to sag by (say) 5m - fairly generous. In this case, there will be a force of 877lb pulling the trees sideways (towards the cable car).   

       If you want less sag in the cable, or if the trees are further apart, the problem gets much worse.   

       Pulling *sideways* on the upper part of a tree with a force approaching 1000lb (or more) is not good for the tree. You're going to need some quite substantial trees.   

       And it's worse. The whole thing has to be cantilevered out from the tree to let the car pass. So, you'll actually be applying a force of 1000lb to a lever of at least a couple of metres which is trying to twist the trunk.   

       Good luck!
MaxwellBuchanan, Jan 08 2008
  

       Thanks for your attention Maxwell. Would not these lateral forces be largely taken up by the next spans on either side? And the total vertical weight on the support stations would be that of the cable, gondola and passenger, 500lbs.   

       We're only 1 meter out from the trunk.   

       We're not connecting high in the tree, but low in the tree - 20' high, I suppose that depends on the tree, but if that is a concern, the cable can run at 10' high.   

       Thanks for your glimpse at Suspension Statics, I've always wondered about the numbers and weights concerning suspended objects. Wondering if an object held out on a clothesline creates more force than if it was simply hanging. And I had a feeling that the lever principal would be involved, but then I get on the web, and there goes the day.   

       You came up with a generous 800s lbs, but that will divide into the two supporting stations. Though the neighboring cable spans will take most, of the lateral force.
M Carter, Jan 08 2008
  

       //Would not these lateral forces be largely taken up by the next spans on either side?// Sadly, no. Not unless you happen to have another car in the middle of each adjacent span (see also below).   

       //And the total vertical weight on the support stations would be that of the cable, gondola and passenger, 500lbs.// Sure, but the vertical weight is not the problem. The problem is the **lateral** force, which is much more than 500lb, as I calculated.   

       //You came up with a generous 800s lbs, but that will divide into the two supporting stations.// No, it won't. If your cable car is mid-way between two trees (A and B) then tree A will experience a net lateral force of 800lb toward tree B. Tree B will also experience a net lateral force of 800lb toward tree A.   

       //Though the neighboring cable spans will take most, of the lateral force.// No, they won't. They will only take a part of the lateral force if the cable is stretched tight between them to begin with (so that deflection of one tree is resisted by the cable alone). But if you do this, the lateral forces generated by the passage of the cable car will be even higher and, overall, you lose out.   

       Listen, try this. First, find the heaviest weight you can lift. Next, take a length of rope (say 15 or 20 feet) and tie one end to something solid a few feet off the ground. Hold the other end of the rope tight and pull as hard as you can. Now get someone to put the weight on the middle of the rope. You will then understand what I mean.   

       It does indeed all come down to leverage, and all that leverage is working against you. If you prefer, it's easier to use the concept of virtual work to do the calculations. But the simple experiment with the rope and the weight is really all you need.   

       Think of it this way. Suppose you've done the experiment described above, and you have a 100lb weight sitting on the floor. The weight is attached to the middle of the rope. One end of the rope is tied to a wall. You're pulling on the other end. Now, to raise the 100lb weight by two feet, you have to pull the end of the rope a distance of much *less* than two feet (to pull it taut and lift the weight). Yet force x distance has to be the same for both you and the weight. So, if you have to pull the end of the rope a only a short distance to lift the weight by 2ft, it follows that you need a much bigger force (ie, much bigger than the 100lb force of the weight) to do so.   

       So, go and read a bit more about leverage, virtual work and so on, or do the experiment.
MaxwellBuchanan, Jan 08 2008
  

       I'm beginning to see your point and will be looking for the laws of suspended weights-tricky business. I'll try some experiments. But I've seen several obstacle courses set up with a harness hanging trolly that rolls from tree to tree, maybe 100' long.   

       Off to Thun for the weekend. In fact, there's one at the cheap resort I'm staying.
M Carter, Jan 10 2008
  

       regarding the physics, it's pretty easy. Just use phythagoras to figure out how much the cable-car would go up for every foot of sideways pull on the supporting cable. The lateral force is related to the weight of the cable car by the inverse of that ratio.
MaxwellBuchanan, Jan 10 2008
  

       I appreciate the illuminations on tension in cables. My once crack Statics and Strengths has atrophied from 30 yrs of zero application, can hardly solve an equation. No, seems I traded in those skills for those of a penniless artist. But you're explanations are very illucidating.   

       Though we see these cable runs in trees very often. I just rode on one. What if the spans were limited to 30 m and the load 400lbs. At 15' high on a two ft dia tree, I can't see more stress than a gust of wind. Though you're right about my cantileverd support. Maybe it could work with a thicker iron bar set at the correct angle to balance the force vectors between two spans.   

       Or a support station could consist of a heavy cable between two close trees, (drilled straight through, with careful antiseptic slopped on and inside the wounds, with the main cable attaching midway between, that should share some load between two trees. How to glide the gondola over this connection is a question.   

       But I will do some experiments, back burner, wait for some miracle arrival of general cash in my life ...first need a home near the forest....
M Carter, Jan 20 2008
  

       //What if the spans were limited...// Well, yes, if the load is light enough then there'll be a point at which it won't break the tree. The length of the spans is not important, except for (a) the weight of the cable per span and (b) the 'droop'. Basically, if you keep the ratio of 'droop' to span constant, and ignore the cable weight, the load on the trees will be constant.   

       Drilling trees is no problem (I've put two 2-foot x 1-inch stainless steel bolts into a beech for a treehouse, and it's quite happy). The tree only 'sees' the hole made through the bark (and the layers immediately after it). The only important point is not to have two holes less than 18 inches apart, or the tree will just kill off the wood between the two holes to try to seal the wound.
MaxwellBuchanan, Jan 20 2008
  

       //enter the desire for a maglev traction that might climb steeper grades, ride the cable more securely,/ Cant wait for the power outage.
sprogga, Mar 18 2008
  

       (Maglev: Idea gets boned) as (Putracine: Flies arrive). This idea takes MAG(ic) LEV(itation) to new heights.
WcW, Mar 18 2008
  
      
[annotate]
  


 

back: main index

business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle