h a l f b a k e r yGood ideas at the time.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
for the dimensionally challenged - when 2 dimensions of the black/white/greenboard are not enough and you need to draw your diagrams in 3D:
the "pen" is like a can of shaving foam with a long tube at the nozzle. the foam can will be pressurized using hydrogen so that the overall foam density can be
made equal to air density... and your 3D drawing floats in the air. optional: foam density adjustment knob.
your drawing might float around for a bit, but that is ok unless you're outdoors or the room is really drafty.
for spectacular effect you can burn your drawings at the end of class/presentation.
Hit for "lighter than air foam"
http://www.flickr.c...llfarmer/133782346/
[2 fries shy of a happy meal, Aug 25 2006]
flogos.net
http://www.flogos.net/FAQ.html
Arvin's link as a link. [jutta, Nov 20 2008]
3Doodler
http://www.kickstar...rst-3d-printing-pen
3D printing pen [xaviergisz, Feb 20 2013]
[link]
|
| |
I'm not sure if this is possible by the means you're describing, but I'll beleive that some lighter-than-air material can be used as 'ink'. Bun. |
|
| |
It's anice idea, in pricipal, but may suffer
from bad physics. I think we need more
detail... foam will squirt out in clumpy
blobs or a diffuse spray - how do you
make stay in the form of outlines? |
|
| |
Show me a stable liquid/foam that is lighter than air at STP and you shall have my bun. |
|
| |
I'm skeptical, so I'll just go ahead an eat the bun. |
|
| |
A presentation could have multiple 'working' components too (i.e. demonstrate a newly designed square peg fitting in a round hole). |
|
| |
the foam should come out continuously... being foam i should expect it would stick together. |
|
| |
you make lines/curves by moving the tip as you press. |
|
| |
of course, i am not sure if water-based foam can ever be made light enough to float and be cohesive and stable... basically to make it lighter we need to make the bubbles/cavities larger, but this would also make the foam more susceptible to breaking up. |
|
| |
the question is, does a trade-off exist? if not with water, perhaps it will work with some liquid with less density and more surface tension... |
|
| |
I'm sure everyone else who annotated here is smarter and far more knowledgable than me. If a foam of this kind isn't possible, maybe some lingering steam or something of the sort? Bubbles? Carved into Jell-o? I don't know but I still like the idea behind the miracle foam. |
|
| |
Every 1/10 of a second while you're drawing, a thin wire shoots out of the nozzle, binds to the foam, and shoots up to the ceiling where it sticks. Thus you actually create a hanging sculpture. |
|
| |
[+] so would the foam have to harden
immediately? |
|
| |
That "GoodStuff" insulating foam must have high pressure gas within it, which it somehow contains. It does set up pretty fast. |
|
| |
I normally fishbone for helium-filled anything, but this does use hydrogen, which is slightly better at lifting. So I'll just fishbone for wishing. |
|
| |
I have worked with a wind-tunnel that put small helium-filled bubbles into the airstream. But I don't see any suggestion for something workable here. Just a WIBNI. |
|
| |
Even if you did get a foam that could harden instantly and float in mid-air, you would still have to anchor it to *something*. Otherwise it's just going to shoot off into some student's eye and harden. |
|
| |
Then where will poor little Jimmy be? Faceless, armless, and now eyeless. Not good. |
|
| |
"The Pyth are soft and low-mass, like–do you know what a jellyfish looks like? A Pyth looks like a foamy jellyfish, hydrogen foam." -- from "Free Floaters" by Brenda Cooper and Larry Niven |
|
| |
http://www.flogos.net/FAQ.html |
|
| |
You've been lurking about, just waiting for that to happen, haven't you? |
|
| |
I wouldn'a thought an LTA foam would work, but there you go. Gotta bun this now. |
|
| |