h a l f b a k e r yPoint of hors d'oevre
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Those of you who've ever tried to lay a traditional
English
hedge-and-wicket will know that you need at least two
different poulting mallets, unless you want either (a)
skinned knuckles andor (b) uneven wicket-lays. At the
minimum, you need a whippy, flexible one for the
hurdles
and a
stiffer one for dead-laying the mains.
But, poulting mallets are bulky and awkward to carry
around, and two of them are doubly so.
So.
MaxCo. Tool and Die (inc.) is proud to announce the
launch
of the VariFlex Poulting Mallet. The flexible, tubular
polypropylene shaft of the mallet contains a strip of
spring-
steel, as wide as the internal diameter of the shaft. The
end-cap of the shaft can be rotated, so that the steel
strip
lies either parallel or orthogonal to the direction in
which
the mallet is swung.
When turned parallel to the direction of swing, the steel
strip gives the shaft just the right stiffness for dead-
laying.
When rotated 90 degrees, the same strip gives the shaft
the cheeky whippiness for hurdle-driving.
The rotating cap of the shaft, of course, still contains a
holder for storing spare crowthers, corks and the other
paraphernalia that hedge-and-wicket layers seem to
consider indispensible.
(Note: this is obviously no use in Norfolk, where they use
heavier or lighter mallet heads instead; but to be honest
they've always been a bit weird in Norfolk, and they can
sort their own problems out.)
Seems familiar
http://www.vivarchi...cles/playscript.htm
[Phrontistery, Jul 12 2012]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
| |
//two tick marks on the shaft. // |
|
| |
Not a bad idea - mind if we adopt it? |
|
| |
There's a special tool for that. |
|
| |
Hmm… Seems like this design would make it tricky to
maintain a sufficiently thick layer of flenting wax. I
suppose one could do without, but it hardly seems
dignified to give it up for the sake of mere
convenience. |
|
| |
//storing spare crowthers// |
|
| |
If you have a spare crowther, why not just get him to
hold your second mallet? |
|
| |
//If you have a spare crowther, why not just get
him to hold your second mallet?// |
|
| |
Ah, I see the error here. You're thinking of a
crowther, in the sense of a player of the Welsh
crwth. Understandable error, but a crowther in
this context is the little plaited twist of willow
bark used to splint the wicket-lay to the warp
hurdle. |
|
| |
(There may, after all, be some connection
between the two etymologies, since the
arrangement of branches in a well-made run of
hedge-and-wicket can resemble a series of crwths
standing upright. Also, the traditional way to test
the quality of the lay is to pluck the crowthers,
which should be taut.) |
|
| |
Ah, I'd always wondered what those were for! Some
sort of
musical instrument, then? I'd figured they were used
to attract
cats during the mating cycle. |
|
| |
As for the splint, I'd always heard them called "Dutch
teeth" or
just "Dutchies", but I suspect that's a term regional to
Wilkes-
Barre, which is one of the few remaining regions in
the United
States where the old method has survived the trans-
Atlantic
journey intact. Most places, you can't even get
traditional
wickets anymore—just the self-looping sort, which
obviates the
need for a crowther. |
|
| |
//I'd always heard them called "Dutch teeth"// |
|
| |
Interesting. They used to be called "German
Notches" in some parts of East Anglia, but any
German-related names were dropped during WWI or
WWII (eg, "German shepherds" became "Alsatians").
Perhaps the "Dutch" in the American term is actually
"Deutsch" (as with "Pennsylvania Dutch")? |
|
| |