h a l f b a k e r yThis would work fine, except in terms of success.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
I build prototype circuit bits mainly "in the air" without the support of a perforated board. In the event that it does not work, circuit nodes have to be probed under power to make sure that the voltages are in the vicinity of what I expect them to be. Sometimes this causes grief as the multimeter or
CRO probe shorts out adjacent nodes and sets a load of silicon free of its magic smoke.
I propose a tub filled with a liquid with electro-optically active (kerr effect*) liquid, illuminated by a xenon strobe thorough a polariser, viewed through polarising glasses. The circuit is put in, clocked at x Hz and the strobe run at x + .05 Hz. Voltage changes in each wire will be visible as a change in its colour, slowed down to once per 20 seconds.
* Kerr Effect: Under the action of an electric field, certain fluids change their optical properties, viz: transmission, dispersion, or rotation of polarisation.
Magic Smoke (in ICs)
http://www.science....n/m/magicsmoke.html
[bristolz, Dec 24 2001, last modified Oct 17 2004]
Bob's Breadboarding ideas
http://www.planetee...ment?ArticleID=1706
What is all this breadboarding stuff, anyhow? [neelandan, Dec 24 2001, last modified Oct 17 2004]
[link]
|
| |
Liquid instumentation! Cool idea. Do you think that such a liquid would alter the behavior of the circuit under inspection? |
|
| |
Wouldn't the liquid effectively be putting a (high-ish?) resistance between all of the exposed wire in the circuit? This doesn't seem like a good idea if the circuit is running at a high frequency. |
|
| |
I thought this was going to be about bathing in mouthwash. |
|
| |
Not all liquids conduct electricity. WD-40 doesn't...I've sprayed it into a moldy ignition switch to clean things up before... |
|
| |
Seems like there'd be a problem of range as well. Would you be able to tell the difference between 4 VDC and 4.5 VDC (if it makes a difference)? And would the same substance work for 500 VAC? |
|
| |
If you don't want to breadboard, try a quasi breadboard with cardboard and tacks. Or use stiffer wire for your prototypes. |
|
| |
I had a stovetop element burn halfway through over t-giving, there was a pop and no one could figure the source until I happened to look to the white glow coming from under a pot. *Bright* white, I should add. Had I poured water on the pot to put out a boilover … |
|
| |
On topic: I like this idea, but it hearkens to much IC processing I know of that is baked. Last neat idea about optically active fluids I saw involved the reproduction of 3D topography in optically active resin. Could an IC surface map be reproduced by activating a IC submerged in optically reactive resin? |
|
| |
[bristolz]: the liquid might add some capacitance to the circuit; I do not think any effect would be appreciable. |
|
| |
[cp]: most kerr effect liquids seem to be insulators. |
|
| |
[PeterSealy]: missed you, on a first cursory look, because the annotation did not have the customary beginning. The board is needed to support components so that the assembled circuit can be carried about. Without a board, the circuit cannot be moved off the table without something shorting out. |
|
| |
[phoenix]: try larger separation for larger voltages so that the resulting electric field is about the same. And no, you might not be able to distinguish a change of 10%. |
|
| |
[reensure] : Is that reproducing hills and vales using resin, or making voltages visible? |
|
| |
[Rods Tiger]: right, on all counts. |
|
| |
There's a real-world version: if you put an IC chip under a scanning electron microscope and tune the energy just right, then voltages on the chip surface will appear as black/white changes in the image of the chip. If you clock a microprocessor really slowly, you can see the signals moving through the whole device. |
|
| |