h a l f b a k e r yactual product may differ from illustration
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
The length of service for an automobile is typically
measured in distance as measured by the same
transmission sensor as the speedometer, but that doesn't
serve as an accurate indication for the real service the
engine has experience. (The lower gears and stop-and-go
nature of city driving
can take its toll on an engine in
fewer miles than highway driving.)
Heavy equipment manufacturers solve this problem by
rating equipment in hours. This is accurate for many
machines because they spend most of their time at a
particular engine speed, and the life in hours corresponds
almost 1:1 with the number of revolutions the engine
makes.
Cars are different, though. A car can spend hours at 3000
rpm or 1800 rpm depending on the speed. Accelerating the
mass of the car requires even higher engine speeds, and
idling is done at about 800 rpm.
Proposed is a second metric for automobile life: an
indicator for the number of engine revolutions. The ratio
of this number to the number of miles (or kilometers) can
also serve as a good indicator for which gears were used
more often.
Hobbs Meter
http://en.wikipedia.org/wiki/Hobbs_meter
[Klaatu, Aug 23 2011]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
| |
Whether by design or by flaw, the hourage meter on my
M35 (which also has an odometer) runs slightly faster at
highway speed than it does at idle or tooling around in the
woods. I've always assumed it to be a bad design or
malfunction, but now I'm thinking it might have been
engineered that way for this very purpose. |
|
| |
Agreed, there ought to be a better method than miles. I worry that people might try to game this by running at lower RPMs. Doing that will lug down the engine, which I heard can cause additional engine wear. On the other side, idling probably causes much less wear per revolution than driving, so this will overestimate the wear in a commuter car that is stuck in traffic for most of it's life. |
|
| |
I wonder if total fuel consumed might correlate better than total revolutions. Or maybe we need to record distance, revolutions, total hours of operation, fuel consumed, total number of gear changes (while accelerating and while not accelerating), percentage of time and precent of fuel consumed in each gear. Then develop a standard computer model to predict engine wear based on those... Of maybe not :) |
|
| |
This isn't a great reflection on how long the vehicle will last, either, as wear is also a function of torque and speed. Some overworked engines will give out sooner, some will last much longer. Some military vehicles are designed with industrial-grade commercial engines and designed to only go 20,000 miles before a scheduled rebuild, but those 20,000 miles are the hardest 20k that that commercial engine model will ever see. |
|
| |
I would actually like a many-digit counter on the
dashboard that clocked up individual revs. |
|
| |
That would either reset every fiew minutes, or it would be
a very, very long readout... |
|
| |
No, has to be linear, with the last digit a blur. |
|
| |
OK, 3000rpm for, say, an hour a day average, over a
10-year lifespan, is under a billion. |
|
| |
In their zealousness for over engineering everything to the
point of absolute annoyance, I think BMW have some nag
that changes the service interval based on a very simlar
concept (meanwhile reducing the power output of the
engine until you obey). |
|
| |
This simple gauge would be more fun; and even better: you
could ignore it when it signalled for a service! |
|
| |
//the life in hours corresponds almost 1:1 with the number of revolutions the engine makes.// |
|
| |
Your equipment must be extremely highly geared. |
|
| |
Perhaps he's an horologist. |
|
| |
A measurement of the number of revs the engine had done wouldn't be comparable between different engine models - e.g. some engines are designed to rev much higher than others. I think a more interesting measurement would be an odometer which sampled the absolute value of acceleration every second and added together these values. Thus, short journeys and harsh acceleration or braking would contribute a lot to the total, whereas idling at traffic lights and long, steady motorway journeys would not. |
|
| |
This is virtually redundant for modern vehicles. The powertrain is not often the first thing to fail. The scrapyards are full of cars that are crashed, rotted to the point that they are not roadworthy, or suffer from the failure of a number of secondary systems such as window / door mechanisms, wipers, lights etc. |
|
| |
I like Max's idea. I had a similar idea for a bike I'm building with a 1950's long stroke single cylinder engine. It ticks over at less than 200rpm, so the last figure on the (mechanical) display would be legible. |
|
| |
Planes have a timer on the tach that only ticks when you
are above a certain RPM, so they won't rack up time while
you are at idle. Then they have the Hobbs that counts
total time. |
|
| |
On further consideration, an integrating count of the quantity of fuel consumed over the service life of the engine is probably a fairly good measure of the amount of "work" done, whatever mode the powerplant is actually running in. |
|
| |
Standard computer model based on N variables... why
not? Throw together an ISO document (or other open
standard) and have an output variable "x" with some
sort of bullshit unit for public consumption, and
bingo... a user-friendly alternative to mileage.
(Plenty of people drive cars without the foggiest idea
of pdV, and I don't see how the result of a black box
100-term polynomial would be any different.) |
|
| |
// On further consideration, an integrating count of the
quantity of fuel consumed over the service life of the
engine // |
|
| |
My dad's GMC Sierra shows this in its digital dash dookickey.
You can flick through it and learn at least a dozen things
about the vehicle's current status that are of interest
exclusively to Halbakers. |
|
| |
Can anyone fathom why an odometer doesn't
measure smells? |
|
| |
For the same reason a fathometer doesn't measure odds. |
|
| |
Please, do try to keep up. |
|
| |
[MaxwellBuchanan] Didn't you mean to ask \\Why
doesn't an
osmometer measure smells?\\? |
|
| |
Baked by Cadillac. The Oil Life Monitor looks at the
type of miles done, cold/hot, fast/slow, etc. |
|
| |
//Please, do try to keep up// |
|
| |
Well then, smartarses, explain why a nanometer
doesn't measure grandmothers. Pah! |
|
| |