Half a croissant, on a plate, with a sign in front of it saying '50c'
h a l f b a k e r y
Not just a think tank. An entire army of think.

idea: add, search, annotate, link, view, overview, recent, by name, random

meta: news, help, about, links, report a problem

account: browse anonymously, or get an account and write.

user:
pass:
register,


             

Please log in.
Before you can vote, you need to register. Please log in or create an account.

LCO2 Hydraulic Hybrid

 Modern Transportation Conceptual Origami #4
 
(0) 		  [vote for,
against]

Hydraulic hybrids <link> are known for their simplicity, (relatively) low cost and very high regeneration efficiency. A pump loads up an (high pressure) accumulator, which is tapped to run an hydraulic motor, the spent fluid then flows into a (low pressure) reservoir, rinse and repeat.

The BMW TurboSteamer <link> brings to reality a long-held desire to harness otherwise-wasted heat from internal-combustion engines.

Research is underway for using supercritical carbon-dioxide in closed loop turbines <link>. At 30ºC, LCO2 enters the supercritical phase, its density decreasing dramatically as the temperature rises further. Supercritical fluids are very slippery.

-------

The idea then is to use liquid/supercritical CO2 as regular engine coolant and exhaust coolant (extracting thermal energy from same) to create a thermal-engine within the workings of an hydraulic hybrid system using sc-CO2 as working fluid.

We combine a regular engine cooling system...
engine -> coolant-pump -> radiator -> engine,

with a regenerating hydraulic system...
reservoir -> pump -> accumulator <-> motor -> reservoir,

creating...
reservoir -> pump -> engine/exhaust-cooling -> accumulator <-> motor -> radiator -> reservoir.

(note how the heating and cooling steps bracket the motor)

Pros (compared with regular hydraulic hybrid system and Turbosteamer)
- decreased complexity: the heat conversion is part of a full-featured hybrid
- increased effectiveness: sc-CO2 starts expanding at 30ºC, not 100ºC
- safe compared to steam
- the hydraulic-fluid/engine-coolant(/aircon charge) is environmentally inconspicuous and costs basically nothing.

Cons
- liquid CO2 means a base pressure of 74 atmospheres, meaning heavier construction of both the engine cooling system componentry (jackets, pipes, radiator) and the hydraulic system
- shared single point of failure for both components of the hybrid system.

Etc.
The system of course includes an electrically-operated CO2 sequesterer to top off, or fill from scratch. All components of the system are cross-valved so you can, for instance, run the engine without having to run the hydraulics, and perhaps have a chance of isolating a leak.

Regarding hydraulic hybrids in general, the system could/should be used for cheaper/simpler power-braking/steering, windows/doorlocks, winches, etc.

—FlyingToaster, May 03 2014

http://en.wikipedia...ki/Hydraulic_hybrid [FlyingToaster, May 03 2014]

http://en.wikipedia.org/wiki/Turbosteamer [FlyingToaster, May 03 2014]

http://en.wikipedia...oxide#Working_fluid [FlyingToaster, May 03 2014]

[link]






       Erm, how about just using water, in a "thermal engine" at say 1/5 of atmospheric pressure on the radiator water, and just a boring old closed cycle steam engine on the exhaust pipes?   

       <realises I am repeating myself here...it must be that kimchi>
—not_morrison_rm, May 03 2014
   

       ^ You mean apart from the "Pros" section of the post ?   

       From the sole viewpoint as an hydraulic-fluid, CO2 might not have much going for it: even though it's probably much easier to pump through the lines due to superlow viscosity, it has to be kept at ~1,000psi or it's not a liquid/scf, meaning some components have to be more robust: there's not as much headroom as in a system which can theoretically use ambient (or less) as a base pressure.   

       On the other hand, from the viewpoint of integrating a heat-engine and hydraulic subsystem together, which is the meat of the idea, it completely blows away the Turbosteamer idea.   

       The fact that they're putting together a 550ºC sc-CO2 closed-loop turbine for electricity production would lead one to assume that its properties as a working fluid are comparable or superior to water in such an application, which is similar to this one.   

       Basically, if you have an hydraulic hybrid concept, you can add heat-recovery to it by running it through the engine and around the exhaust, replacing the existing engine-cooling system.
—FlyingToaster, May 03 2014
   

       There's quite a difference between water in its liquid and gaseous states, including a large energy cliff at the boiling point. The post uses a supercritical fluid with no chaotic transitional properties throughout the entire temperature range.   

       Apart from the base pressure considerations, it's rather less complicated than a steam engine.
—FlyingToaster, May 03 2014
   
      
[annotate]
   


 

back: main index
business  computer  culture  fashion  food  halfbakery  home  other  product  public  science  sport  vehicle