h a l f b a k e r yNot from concentrate.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
For years I have been draining the batteries that power my tools before charging them. It eliminates the “memory” effect that rechargeable batteries are plagued with. Ill use my cordless drill as an example; after driving screws into my deck, the drill gets weak and loses the torque to drive anymore
screws. At this point the battery is dead to my purpose, but still has a lot of juice. What I do then is get out the alligator clips, clip them to the battery and look for something on my workbench to play with. Most of the time I use a motor, or a halogen bulb to kill the battery. What I realized is that I could just this power productively, to do something visually stimulating.
Maybe a small fountain with colored water powered by the battery…. Maybe a small fan that blows air past tinsel that looks interesting…. Or how about a strobe light and spinning disc combo! The pattern would change with the amount of charge left. These are my lame ideas. If you had 8-18v to play with, how would you waste it?
laptop battery fire demo
http://www.youtube....Pr2CxxvxnlK-s3rtCiA
[nuclear hobo, May 18 2007]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Annotation:
|
| |
Seriously overpowered sex toys. Downside: finally running out of charge just as you're hitting your climactic stride. Practice speed swaps. |
|
| |
With some of the newer cordless tools you are supposed to recharge the battery the instant that you feel a drain in power in order to maintain optimum charge capacity.
(Sorry, that's not much help at all is it?) |
|
| |
** Danger - Long and tedious educational anno ahead. Reader discretion is advised. ** |
|
| |
It depends whether you're using nickel cadmium (NiCd) or nickel metal hydride (NiMH). NiCd are old-school rechargeables that work most efficiently when cycled - that is drained to a low level then fully recharged. Please note I said *drained to a low level* and not completely depleted, because if you were to wring the very last bit of electrical power out of a NiCd the chemical process just might stop completely and your becomes battery landfill (Just kidding - lots of places recycle rechargeables these days). It does not hurt to top up a NiCd battery's charge occasionally. Just don't make it routine or it could become permanently short-changed. |
|
| |
NiMH batteries are newer, at least in the household-use battery world. They have all the down-home goodness of NiCds (they recharge hundreds of times over) without the embarrassment of premature aging (memory effect). As an added bonus, your NiMH battery carries more punch - usually more than double the energy of a NiCd of the comparable size. So you can recharge your NiMHs any time you damn well please. |
|
| |
So, evilpengy, switch to NiMH battery packs for your power tools and stop pissing away electricity, because no matter how entertaining you make it, whatever left-over power you burn off with these assorted frivolous doowhatchamacallit thingys will just have to be put back into the battery when you recharge it. (And if you can't find a NiMH replacement pack then locate your nearest battery rebuild shop. They can convert a NiCd into a NiMH faster than you can say "Flamboyant Battery Killer"!) |
|
| |
Canuck, respect sir..... thats all I have to say |
|
| |
Lt_Frank - hey, Im very much new to halfbakery. Give me a chance...to....do gooder..? |
|
| |
You could just use the Sony batteries and watch your laptop go up in flames. |
|
| |
Further to Canuck's fine educational comments - I heard that NiMH batteries will work better if they are kept charged beyond a certain amount. i.e. rather than letting them run all the way down, it's better for them to stay perpetually topped up at over 50% if possible - depleting them as per NiCds can mess them up. |
|
| |
//NiMH batteries will work better if they
are kept charged beyond a certain
amount// |
|
| |
So, presumably, the ideal would be to
keep such batteries charged as fully as
possible, with only minimal discharge?
How about building a small, lightweight
battery charger into the power tool
itself - I'm thinking that modern
switch-mode power supplies could do
this, as they are much lighter than old
transformer-based ones. Then, just
have a lead so that you can plug the
on-board battery charger into a nearby
mains outlet while you use the tool,
thereby keeping the battery topped up
at all times. Would also eliminate the
need for a seperate charging stand for
the battery-packs. |
|
| |
The memory effect is a voltage reduction which causes some equipment to switch off early. Even NiMH batteries have a small memory effect. |
|
| |
To remove the memory, as previously stated, discharge and charge some full cycles, but don't use something that switches off early like a camera. Also, don't over discharge 'cos this can also damage the battery. |
|
| |
Further to MB's comment: the ultimate is to use a small battery just to bridge those pesky zero volt problems with ac supplies. |
|
| |
Maybe a device that uses electrolysis to convert water to Hydrogen and Oxygen and then later burns them to burn stuff? |
|
| |
there's always the obvious... charge smaller batteries with it. |
|
| |
//...Then, just have a lead so that you can plug the on-board battery charger into a nearby mains outlet while you use the tool...// |
|
| |