h a l f b a k e r yYour journey of inspiration and perplexement provides a certain dark frisson.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Please log in.
Before you can vote, you need to register.
Please log in or create an account.
|
Ambient light can be converted to currents through existing (baked) panels but don't provide the energy density needed to independently power a whole house. Ambient sound, depending on where you are, could add to these currents in some small degree, using piezo-electric. Ambient wind power might add
significantly depending on locale. Point is, all these dispersed sources of small amounts of power could be used to provide tiny magnetic pulse which exerted additive force against a flywheel, timed relative to the immediate speed of rotation. The pulses would activate small electromagnets embedded under the flywheel and acting against counter-charged permanent magnets in the surface. Manny a mickle macks a muckle, or something like that.
Beacon Flywheel - 6kWh
http://www.beaconpo...martEnergy25kWh.htm Enough power for a house. Enclosed in vaccuum. [Laughs Last, Oct 04 2004, last modified Jun 30 2006]
Re-Energizer
http://www.wired.co...1&topic=&topic_set= Excellent flywheel article from "Wired", May 2000 [BunsenHoneydew, Oct 04 2004]
[link]
|
|
Why? Seems power consumed overcoming friction in the flywheel would dwarf all of the energy sources listed. |
|
|
Could you hook up the exercise bike to get things started each morning? |
|
|
I had the same thought, only different energy sources. As
luck
would have it, my cousin did his master's in mechanical
engineering thesis on bearing
technology. He says it is totally possible, but the expense
of a siutable bearing is so high, you won't recoup it in
energy savings for the life of the bearing, which is low,
and
requires high maintenance expense, even further
reducing the possibility for recouping expenses with
energy savings. Even a very slight amount wear will
reduce the performance enough to be ineffective,
according to him. |
|
|
What if you scrapped the flywheel and used a capacitor instead? |
|
|
What if you scrapped the capacitor and bought some batteries? |
|
|
[OC]: Would it be possible to use some sort of passive magnetic bearing? Would that be more expensive than high quality conventional bearings? |
|
|
We didn't discuss that, but I see that it is, according to
LL's link. But I still don't know how good this would be for
trickle charging, or human charging, and how long it
would maintain charge without power input. The
flywheel in the link is constantly charged by AC power,
and the energy used as soon as the main power is cut. I
was interested in long-term energy storage, like for many
days with no power input without too much energy loss. |
|
|
There are myriad sources of energy
on a microscale around any building
-- thermals, winds, light, and
sound. Anyway, the flow of
microamp currents would be almost
constant. So that wheel is being
nipped with a large number of tiny
accelerations, which account against
the inertial resistance or frictional
resistance of the bearing and the
very intermittent loads imposed by
use of current. I haven't calculated
the balance sheet.
|
|
|
Flywheels vice batteries or caps is a
comparison I haven't looked into in
detail. LL's link offers some benefits
to the flywheel. |
|
|
When I looked into "Beacon" 3 or so years ago, I found that their old 2kWh unit had a rate of internal loss of about 40 Watts. That unit used an all-steel flywheel, if I recall. The new 6kWh uses a composite material flywheel, and I think they are rotating it faster than the old steel one. They dont seem to be advertising the efficiency of the newer units, but they do have a toll free telephone number. |
|
|
// some sort of passive magnetic bearing // |
|
|
Don't fall into the trap of thinking that just because they're (almost) free from mechanical friction, that they're a lot better. With things like flux leakage and eddy currents, they can still present formidable problems. Hopefully this will either be corrected or elaborated, cause I don't know much about it really. |
|
|
I agree with [Worldgineer]. :) |
|
|
Why bearings at all? Build it as a spinning top, with the tops base and the cradle made from extremely heat resistant materials then use the heat produced to power a Sterling engine. |
|
|
[2fries] The point where the top balances is a bearing. Anytime you have surfaces moving at two different velocities touching, you have a bearing. |
|
|
Aha, my something new for the day is early. :] |
|
| |