h a l f b a k e r yWe don't have enough art & classy shit around here.
add, search, annotate, link, view, overview, recent, by name, random
news, help, about, links, report a problem
browse anonymously,
or get an account
and write.
register,
|
|
|
Imagine yourself lying on the couch, it's the middle of the summer and super boring... You reach over for your handy can of Pringles or some other brand of chips and open the cap. The can is old and inside you can see the chips down at the bottom but they are too far to reach, OH Noooooo!
Now, take
a look at your neighbor, he's also sitting on the couch but when he reaches for his can of chips and pops the lid, the chips have already been raised up to the lid and he simply has to pull one off the stack and enjoy,, no reaching in the can for him!
How was he able to achieve such a thing? He bought a can with the Chip-Lifter. The Chip-Lifter is a small plastic covered device that weighs your chips and as it senses that the weight is too less and you will have to reach in the can -GASP- it automatically goes up a few notches, not enough to shoot the chips out but enough to raise it so you can pull them out...
Prior art
Tear-Away_20Pringles_20Canister I believe this idea was mentioned in the annos. [Canuck, Jan 04 2008]
Pringle lifter
http://imgur.com/DrJHRPm [xaviergisz, Oct 04 2014]
Please log in.
If you're not logged in,
you can see what this page
looks like, but you will
not be able to add anything.
Destination URL.
E.g., https://www.coffee.com/
Description (displayed with the short name and URL.)
|
|
NOTE: This device does not require electricity, it merely uses the can as the counterweight. |
|
|
Nice lateral thinking - the plates at Home Town Buffet can do this, Shirley the mechanism can be adapted to the Pringles can. |
|
|
This might be a WTAGIPBAN. |
|
|
By the way, for your first pedantic whipping: "the weight is too less" should be "the weight is too _little_" or even better "the chip weight goes below a minimum threshold". |
|
|
Gravity is simply not complex enough. |
|
|
// simply not complex enough // |
|
|
Try the Weak Nuclear Force, it's nice and complicated...... if it actually exists ..... |
|
|
Well, due to the prior art discovery, it can't officially be called a WTAGIPBAN, but we have to give [devo] a break on that - that was a tough one to search. It was a good half-baked idea then and still is. |
|
|
//Try the Weak Nuclear Force, it's nice and
complicated...... if it actually exists ....// I
didn't think anyone had queried the
existence of the WNF since shortly after we
stopped querying the roundness of the
Earth? |
|
|
// we stopped querying the roundness of the Earth // |
|
|
Have you actually, personally, seen the Earth from space ? Boy, are you in for a shock ..... |
|
|
No, but I've seen space from the Earth, and
it has a big spherical hole in the middle. |
|
|
if you're not averse to a little twisting, your problem is easily solved by incorporating the twisty mechanism found in deodorants, lipsticks, etc. in pringles cans. |
|
|
push up the next batch of chips with a little twist. |
|
|
My original idea was to load the Pringles can in a caulk gun, but what you really want is pretty easy... |
|
|
When making the new Pringes cans, attach two plastic coiled flat springs to the top edge of the can opposite each other. Now put in the piston, which is basically a thin plastic cylinder with a chip shaped top, two cavities for the flat springs to uncoil in and a skirt long enough to stop the piston from turning sideways in the can.
You may want to add a chip shaped add-on for the cap, so you don't break chips putting he cap back on. |
|
|
I think in mass production, this could be done reasonably cheaply. The tough part is designing the flat springs to just exceed the weight of one chip. Also the bottom piston lifter is going to take up some room (for piston skirt length), so you'd get less chips in a can. You could limit this by using side rails, but I think that would be more expensive to make. |
|
|
Also, you'd have to convince people to open the cans while verticle, as if done horizontally, all the chips will fall out. |
|
| |