As background for this Idea, see the link. It describes an "interferometric modulator" or "IMOD" device, which can affect ordinary ambient white light in an unusual way: It causes some of the light-waves to interfere with each other and "disappear", leaving the rest of the light to reflect as a pure color.
In Nature, it is the mechanism by which butterflies get their wing-colors.
A single IMOD is a "two-state" device: it has a sort-of transparent "flap" that flips between a "high" position and a "low" position, and the result is that the device either reflects a pure color, or it shows black (the bottom of the IMOD cell is colored black).
Therefore, to reflect white, at least three IMODs are needed, one each for red, green and blue. This Idea is about a variation on the theme, which, if it works as described, should be better in several ways.
A Rotary Interferomodulation pixel has a white bottom and a glass top. This cell is cylindrical in shape, like a classic well, where a bucket is used to fetch water. The diameter of the cylinder is maybe 100 microns, but there are reasons why you might want it either smaller or larger, so let's say that 100 microns (1/10 millimeter) is an estimate.
The glass top is thick enough to have screw-threads on its edge. (Look at the metal screw-top lid of an ordinary jar, and even on the outside edge, you can see hints of the screw-threads that are on the inside of the lid.) The whole well-depth also has screw-threads. Therefore the glass top of our Rotary Interferomodulation pixel can be rotated/screwed all the way down to the bottom of the well/cylinder, or all the way out of the well/cylinder.
When the glass top is at the top of the well, NO interference happens. So ambient light passes through the glass, reflects off the white bottom, and passes through the glass again, and an observer will see a white pixel.
Screw the glass top partway down, and now some light-wave interference begins to happen, so the observer will now see a colored pixel. Which color? Depending on how far down the well the glass is screwed, it can be any color of the spectrum, from red to violet!
And if the glass is screwed down just a bit farther (NOT all the way to the bottom), then all the visible-light-waves interfere with each other, and the result is a black pixel, despite the bottom of the cell being colored white.
Now, how do we rotate that tiny circular piece of glass? I'm going to suggest that when it is made, it is made as a multi-charged electret (see link). Imagine it being invisibly divided up like a pizza, and alternate slices have alternate permanent-static-electric charges --"Plus" followed by "Minus" followed by "Plus" followed by "Minus" ...
The wall of the cylindrical well can now contain electronic circuits and capacitors, which when appropriately charged can attract or repel certain of the glass pizza slices. Note that lots of today's circuitry, in computer chips, has features smaller than 0.1 micron, so quite a lot of electronics can be fit in the walls of our well/cylinder. The circular piece of glass is, essentially, the rotor of a simple electric motor. And we can run that motor either forward or backward, so that the piece of glass either screws closer to the bottom of the well, or farther away from it.
Note that when the power is off, there is nothing to cause that piece of glass to rotate, so no power is needed for it to continue to display whatever color (from ambient light, remember).
Now build a nice large array of those pixels (1024x1024 is more than a million of them), and you will have an extremely versatile display screen. Note that since each pixel is circular, they can naturally fit together fairly closely, much like a grid of hexagons.
Note that the pixel-size of a typical computer monitor these days is approximately 250 microns (1/4 millimeter). And the pixels of a large-screen TV are even larger.
The reason we might want each of the glass pieces to be smaller than 100 microns is, each will have less mass, and can be rotated faster, using less energy. A certain minimum rotation speed is essential, if we want this display to handle full-motion video. However, this will mean that a number of those small pixels are needed to equal one ordinary monitor-pixel.
The reason we might want each of the glass pieces to be larger than 100 microns is, the overall display will be less complex (fewer components), and thus be less expensive. This variation on the theme might best be used in e-book readers, where full-motion video is seldom needed.-- Vernon, Feb 13 2012 IMOD info http://en.wikipedia...c_modulator_displayAs mentioned in the main text. [Vernon, Feb 13 2012] About Electrets http://en.wikipedia.org/wiki/ElectretAs mentioned in the main text. [Vernon, Feb 13 2012] piezoelectric display II shameless self promotion [xaviergisz, Feb 13 2012] Next-Generation IMOD https://www.qualcom.../mirasol/technologyOne light-reflecting element CAN show a spectrum of colors, somewhat differently than described in this Idea. [Vernon, Jul 03 2015] The pixels require such small movement that something like a piezoelectric or electroactivate polymer (EAP) would be more suitable.
Also, you can only turn the pixels on and off. You'd need an array of subpixels to vary the intensity of a pixel (same as with existing IMOD displays).-- xaviergisz, Feb 13 2012 Sorry but when I see "IMOD" I think of the infinity modulator, a weapon designed for use against the Borg. It has an infinite variation in frequency so they cannot adapt shields to counter it.
A threaded bun. Screw it into a plate with matching threads and make a sandwich.-- Psalm_97, Feb 13 2012 I'll wait for the Lion's Club version-- simonj, Feb 13 2012 Have we done threaded bread and threaded sandwich fillings? If not that would be a worthy idea to post.-- pocmloc, Feb 13 2012 Aww, crap, somebody mentioned an anti-Borg weapon. Now we're gonna get a three-part seminar explaining in excrutiating detail why it wouldn't actually work...
<battens the hatches>-- Alterother, Feb 13 2012 <Cleans whiteboard, arranges coloured marker pens in E24 resistor order>
<Checks supply of flipcharts and OHP film in case all three of the data projectors fail>
<locates additional supply of chalk and charcoal in case of all presentation technology having a Total Reality Failure>
<Locks doors including fire exits, checks grilles on widows secure>
<Smiles gloatingly at audience>
"Since you've raised that interesting point ...."-- 8th of 7, Feb 13 2012 <realises that the audience all left 10 minutes before>-- pocmloc, Feb 13 2012 I like it.Archimedias Screws.-- 2 fries shy of a happy meal, Feb 13 2012 //whiteboard,flipcharts, OHP film, data projectors, chalk and charcoal...
But...no actual mention of PowerPoint, is the Borg being merciful?-- not_morrison_rm, Jul 03 2015 Powerpoint is used on all media by default.-- pocmloc, Jul 03 2015 // is the Borg being merciful? //
No.
When you reach Stage Six (fugue, continuous uncontrolled screaming, loss of spincter control, functional blindness, aphasia, gnawing your own limbs off), THEN we begin with the PowerPoints.
They mostly use ClipArt .... but some have ...dah Da DAAA ... cute animations of kittens ...
Oh, the evil of it ... <gratuitous catbert-like gloating>-- 8th of 7, Jul 03 2015 random, halfbakery